IMPER ROOF : Waterproofing Systems for the Construction Industry

HOME

COMPANY

TYPICAL DETAILS

Bitumen Polymer Membranes (APP,SBS) Modified

Paralon Plus

	The first Agreement certificate issued for an entire product series: the PARALON range rather than a single product.
	The first Agreement certificate covering fire resistant roofing products.
	The first Agreement certificate covering products with different types of reinforcement: classic continuous filament polyester fabric, stabilized continuous filament polyester fabric, and composite.
	The first Agreement certificate covering both 3 mm and 4 mm thick versions.

The new ITC Agreement certificate confirms the outstanding technical merits that have made PARALON a byword for reliable performance and durability for over 25 years. ITC - the Italian National Research Council’s Institute of Construction Technologies - has extended European Technical Approval certification to the entire PARALON range of products designed to meet the most widely varying design and application needs. Certification covers both talc-treated and slate surfaced membranes, as well as those featuring the innovative TEXTENE® finish.

PARALON NT4 PLUS
Elasto-plastomeric bitumen polymer membrane with non-woven continuous filament polyester fabric reinforcing mat.
Thickness: 4 mm
Cold flexibility: -20 °C
Optional TEXTENE® finish on upper face may be specified instead of standard talc
treatment.

PARALON ARD/HS PLUS
Elasto-plastomeric bitumen polymer membrane with non-woven continuous
filament polyester fabric reinforcing mat. Upper face surfaced with slate chipping's.
Available in red, green and natural slate grey.
Thickness: 4 mm (plus slate chipping's)
Cold flexibility: -20 °C

PARALON ARD/S PLUS
Elasto-plastomeric bitumen polymer membrane with non-woven continuous
filament polyester fabric reinforcing mat. Upper face surfaced with slate chipping's.
Available in red, charcoal and natural slate grey.
Mass: 4.5 kg/m2
Cold flexibility: -20 °C

Specifications 1)	Reference standard	Unit of measure	NT4 PLUS	ARD/S PLUS	ARD/HS PLUS	NT4 PLUS ST	ARD/HS PLUS ST
Compound			PARALLOY ® (high performance elasto-plastomeric)
Reinforcement			Continuous filament polyester			Stabilized continuous filament polyester
Roll dimensions	EN 1848-1	m	1 x 8	1 x 8	1 x 8	1 x 8	1 x 8
Thickness	EN 1849-1	mm	4		4 + Slate	4	4 + Slate
Mass	EN 1849-1	kg/m2		4,5
Standard colour		-	Black	Grey 2)	Grey 2)	Black	Grey 2)
Tensile strength (maximum load = breaking load)	EN 12311-1
- Strength (L/T)		N/5 cm	750/650	750/650	750/650	750/650	750/650
- Elongation (L/T)		%	50/50	50/50	50/50	50/50	50/50
Cold flexibility	EN 1109	°C	-20	-20	-20	-20	-20
Puncture resistance Static indentation	EN 12730	Class L	L25	L25	L25	L25	L25
Puncture resistance Dynamic indentation	EN 12691	Class I	I10	I10	I10	I10	I10
Shape stability at 140 °C	EN 1110	-
Water impermeability at 60 kPa	EN 1928	-
Dimensional stability, L/T	EN 1107-1/A	%	< 0,5/0,5	< 0,5/0,5	< 0,5/0,5	< 0,5/0,5	< 0,5/0,5
Tear resistance, L/T	EN 12310-1	N	160/180	160/180	160/180	160/180	160/180
Heat aging in air - Cold flexibility after heating - for 180 days at 70 °C	EN 1109	°C	-15	-15	-15	-15	-15
Q.U.V. Accelerated Weathering Tester exposure. Test cycle: - 4 hours of UV ASTM/ Passes test radiation, peak emission ANSI G 53 313 nm at 60 °C - 4 hours of vapor condensation at 40 °C Test duration : 400 hours	ASTM/ ANSI G 53	Passes test

1) If not otherwise specified, stated values are subject to the tolerances envisaged by UEAtc Directives for bitumen-polymer elastomer membranes.
2) Also available in green and red. Slate colours may vary according to chip orientation or as a result of normal shading tolerances.
3) UBAtc - ATG 1364 certification (following tests LMC No. E/61038 and 5/61039 on PARALON NT4 PLUS FIRE and PARALON ARD/HS PLUS FIRE).
4) CSI/0116/94/RF certification (following tests CSE RF 2/75/4 and CSE RF 3/77 on PARALON 470 FIRE/A).